|
The Making of The Pentultimate - Assembly Jigs |
 |
 |
 |
|
Written by Administrator
|
|
Monday, 28 April 2008 01:17 |
|
Page 10 of 15
To hold the parts in straight stacks for fastening together with a screw, jigs were required. The jigs were designed in Solidworks, keeping their size under the size of a "two-by-four".
Then the jigs were machined from soft wood stock. 
The parts were stacked up inside the jig. 
And the jig was clamped shut for driving the screw. 
A jig was also made for the pentagonal pieces. 
The pieces were stacked carefully inside. 
And then a screw was driven through all the parts in the stack to fix them together. 
|
|
Last Updated on Sunday, 30 November 2008 06:25 |
The Pentultimate