Home The Pentultimate
The Making of The Pentultimate
The Making of The Pentultimate - The Tabs PDF Print E-mail
Written by Administrator   
Monday, 28 April 2008 01:17
Article Index
The Making of The Pentultimate
Mechanism
Layout for Machining
Machining the Triangles
Triangle Masters
The Pentagons
The Molds
Casting the Parts
The Tabs
Assembly Jigs
Component Assembly
The Tiles
Final Assembly
The Final Result
Number of Parts
All Pages
Page 9 of 15
The tabs were all machined, since only one sheet of parts would be needed. Tabs of same size were laid out in rows, so that mill tool sizes could be changed for the smaller parts.

 

The smallest tabs required a 1/32 inch end mill.

 
Last Updated on Sunday, 30 November 2008 06:25
 
Copyright © 2010 Puzzle Forge. All Rights Reserved.